Cause Due to signal transmission
Dec 31, 2023 20:38:57 GMT -12
Post by jiniya123 on Dec 31, 2023 20:38:57 GMT -12
ATV is experiencing interference and this is determined to be the cause the fix is simple by calling technical support to check and replace the cable. The purpose is to ensure a stable transmission. Quality cable TV Humid weather affects transmission qualityThis often causes signal loss or noise when you are watching resulting in unstable quality. cable TV plug The cable ends are rusty or loose causing signal loss or interference Fix Check and determine if this is the cause then simply adjust the cable head or replace it if the cable head is rusty affecting contact ability.
However you need to replace it with a good one to ensure quality. from the network operator Although this cause is rare it is not an exception. When the transmission line from the network is affected simultaneously it also causes interference errors blurring or stripes etc. Solution For this cause you cannot intervene or fix it yourself. The simplest and easiest way is to contact Song Thu Da Nang cable TV switchboard directly at to receive quick support Graphics Design Service from the team. Reason Due to the division of river cable TV many TVs are received Many people do not use separate supply lines for each TV but save money by dividing multiple cable branches to the TV. This unintentionally causes the quality of the TV transmission to be more or less affected.
The phenomenon you can see most clearly is that the signal plays slowly Cause Due to the connector of the transmission cable being rusted and loose Due to prolonged use the cable connector becomes rusty or external influences cause the cable to become loose. or occasionally appears stripes... Fix for this reason you need to use an additional signal amplifier when using so that the TVs in the house receive a strong signal from the network. Depending on the amplifier you choose you can.
However you need to replace it with a good one to ensure quality. from the network operator Although this cause is rare it is not an exception. When the transmission line from the network is affected simultaneously it also causes interference errors blurring or stripes etc. Solution For this cause you cannot intervene or fix it yourself. The simplest and easiest way is to contact Song Thu Da Nang cable TV switchboard directly at to receive quick support Graphics Design Service from the team. Reason Due to the division of river cable TV many TVs are received Many people do not use separate supply lines for each TV but save money by dividing multiple cable branches to the TV. This unintentionally causes the quality of the TV transmission to be more or less affected.
The phenomenon you can see most clearly is that the signal plays slowly Cause Due to the connector of the transmission cable being rusted and loose Due to prolonged use the cable connector becomes rusty or external influences cause the cable to become loose. or occasionally appears stripes... Fix for this reason you need to use an additional signal amplifier when using so that the TVs in the house receive a strong signal from the network. Depending on the amplifier you choose you can.